A laboratory centrifuge
A laboratory centrifuge
The laboratory centrifuge is specially used for fine chemical, pharmaceutical, biotechnology, scientific research and food processing laboratories. Its versatility is not only suitable for the laboratory, but also for pilot or small-scale production. It is
Optional equipment:
Explosion-proof equipment: centrifuge are installed on the motor and electric equipment is in line with eu standards EN50014/50018/50019/50020. It can also be equipped with sealed electric control box according to the same explosion-proof standard.
Gas protection: the centrifuge is constructed and designed to be equipped with nitrogen protection (nitrogen tube and appropriate end cover sealing ring), gas sealing device and siphon.
Material: special stainless steel or Hastelloy alloy, end cap sealing ring surface covered with fluorine rubber.
Attachment:
-- Drum: 200mm diameter (effective volume 1.2 L), 300mm(effective volume 5.5 L) through the retention or active skimmer drain liquid.
- test tube holder
-- Removable filter bags made of various materials
-- The observation lamp is provided with a cover
-- Mobile platform car made of low carbon steel or stainless steel
-- Loop timer
-- The centrifuge cover is equipped with rotatable nozzle (on-line cleaning)
General features:
Rugged construction, the vertical centrifuge is mounted on four rubber damper pads.
Drum: 200mm(RC20) and 300mm(RC30) diameter, with removable filter bag. Speed is 300r/min.
The cover is equipped with a sealing gasket, safety locking device, feed pipe and viewing mirror.
Drive: the motor controlled by the frequency converter is driven by the V-belt, so as to realize the operation of starting, braking and changing gears. All electrical equipment installed and on the machine are manufactured according to IP55 standard.
Safety: The machine is equipped with a comprehensive safety protection device.
The centrifuge is controlled by a control box mounted on the centrifuge, and the control panel containing the contactor inside is placed in a safe area.
Material: AISL304, 316, 904L, TA2 and other materials can be used for all parts in contact with the material.
model | Drum diameter | Drum height | Effective volume | Maximum loading capacity | speed | The length of the | The width of the | highly | Open height | The weight of the |
RC20 | 200 | 100 | 1.2 | 1.5 | 3000 | 780 | 440 | 645 | 975 | 130 |
RC30 | 300 | 150 | 5.5 | 6.8 | 3000 | 780 | 440 | 645 | 975 | 130 |